Product Description
Ld07 Cam Clutch for Reducers and Gearboxes
Merchandise Description
Installation and Use
1. LD Collection Cam Clutch is prelubricated with special grease and are completely ready for use.
No additional lubricant is necessary.
2. When installing the clutch on the shaft, push the clutch internal race marginally with a gentle hammer to prevent the clutch
Outer race from slipping absent from the internal race.
3. Be sure to connect the plate. This helps prevent the outer race from slipping absent from the inner race. See advised
Proportions of the plate listed on the proper.
4. For lubrication, coat the plate and thrust metallic with grease.
5. Never utilize thrust hundreds to the clutch. CZPT gadgets should be provided to get up thrust masses used to the clutch.
six. Crucial must be in accordance with JIS B1301-1959.
seven. The bores of the pulley, sprocket, and so on., should have a tolerance of H6 or H7.
Parameter Sheet
| Model | Torque Ability (N.m) | Drag Torque (N@m) | Max. Overrunning (r/min) | Max. inHangZhou (cycle /min) |
Max.Radial Load When Overrunning (kgf) | Bore Size | A | B | C | D | E | Outer Race Keyway |
Fat (kg) | |
| Inner Race | Dia. (H7) | Keyway | ||||||||||||
| LD04 | 5.88 | 0.two | 300 | 100 | 20 | 10 | 4×1.5 | 19.5 | 23.nine | 24 | forty seven -.014 | 40 | 5×3 | 0.25 |
| -.039 | ||||||||||||||
| LD05 | 9.eight | 0.29 | 300 | 100 | 30 | 14 | 5×2 | 19.5 | 23.9 | 24 | 52 -.017 | 45 | 5×3 | 0.three |
| -.042 | ||||||||||||||
| LD06 | 19.6 | 0.29 | 200 | 100 | 50 | 20 | 5×2 | 19.5 | 23.9 | 24 | sixty two -.017 | 52 | 7×4 | 0.four |
| -.042 | ||||||||||||||
| LD07 | 29.four | 0.39 | 200 | 100 | 70 | 25 | 7×3 | 19.5 | 23.9 | 24 | 72 -.017 | 62 | 7×4 | 0.fifty five |
| -.042 | ||||||||||||||
| LD08 | 49 | 0.forty nine | 200 | 100 | 80 | 30 | 7×3 | 19.five | 23.nine | 24 | eighty two -.017 | 70 | 10×4.5 | 0.sixty five |
| -.042 | ||||||||||||||
